Abstract View

Author(s): Anand Pathak1, Saurabh Deshmukh2

Email(s): 1anandpathak519@gmail.com

Address:

    1Department of Mechanical Engineering, R. V. College of Engineering, Bangalore, 560059, Karnataka, India
    College of Engineering & Technology, Bhilai, Chhattisgarh, 490024, CG, India.

Published In:   Volume - 1,      Issue - 1,     Year - 2021

DOI: Not Available

 View HTML        View PDF

Please allow Pop-Up for this website to view PDF file.

ABSTRACT:
Exhaust system has vital role in performance of IC engine which can significantly affect the fuel consumption, exhaust smoke emission and temperature. The objective of current research is to investigate the heat transfer characteristics of exhaust manifold incorporated with fins. The CAD design of the exhaust manifold is developed using Creo design software and its thermal analysis was conducted using the ANSYS v21 simulation package. The CFD analysis is also conducted to determine the effect of fins on heat transfer characteristics of exhaust manifold. Thermal characteristics of exhaust manifold system using CFD have shown an enhancement of heat dissipation capability by 3.01%. The incorporation of fins augmented turbulent flow which enhanced heat dissipation capability of exhaust manifold with 2.42% reduction in maximum temperature.

Cite this article:
Anand Pathak, Saurabh Deshmukh (2021).Thermal analysis of Exhaust manifold system using computational fluid dynamics. Spectrum of Emerging Sciences, 1(1), pp. 50-55.



[1] Jafar M. Hassan, Wahid S. Mohammed, Thamer A. Mohamed, Wissam H. Alawee, CFD simulation for manifold with tapered longitudinal section‖, International Journal of Emerging Technology and Advanced Engineering Volume 4, Issue 2, February 2014.

[2] Nikhil Kanawade, Omkar Siras, Design, analysis and development of 4-cylinder IC engine exhaust manifold, International Engineering Research Journal Page No 472-478.

[3] Mohd Sajid Ahmed, Kailash B A, Gowreesh, design and analysis of a multicylinder four stroke SI engine exhaust manifold using CFD technique, International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056.

[4] Kanupriya Bajpai,Akash Chandrakar, Akshay Agrawal,Shiena Shekhar, CFD analysis of  exhaust manifold of si engine and comparison of back pressure using alternative fuels, IOSR Journal of Mechanical and Civil Engineering (IOSRJMCE),Volume 14, Issue1Ver. I (Jan.-Feb. 2017).

[5] K. Nanthagopal, B. Ashok, R. Thundil Karuppa Raj,  Design considerations and overview of an engine exhaust manifold gasket‖, Journal of Chemical and Pharmaceutical Sciences ISSN: 0974-2115.

[6] Vivekanand Navadagi, Siddaveer Sangamad, ―CFD Analysis of exhaust manifold of multi- cylinder petrol engine for optimal geometry to reduce back pressure‖, International Journal of Engineering Research & Technology Vol. 3 - Issue 3 (March - 2014).

[7] K.S.Umesh ,V.K. Pravin and K. Rajagopal , Experimental investigation of various exhaust manifold designs and comparison of engine performance parameters for these to determine optimal exhaust manifold design for various applications‖, Proc. of Int. Conf. on Advances in Mechanical Engineering,AETAME

[8] Gopaal, M. M. Kumara Varma, L Suresh Kumar, Thermal and structural analysis of an exhaust manifold of a multi cylinder engine, international journal of mechanical engineering and technology (i) ISSN 0976 – 6340.

[9] K. S. Umesh, V. K. Pravin, K. Rajagopal, CFD analysis of exhaust manifold of multi-cylinder SI Engine to determine optimal geometry for reducing emission, International Journal of Automobile Engineering ISSN 2277-4785Vol. 3, Issue 4, Oct 2013, 45-56.

[10] Jae Ung Cho, A study on flow analysis of the exhaust manifold for automobile, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 11, Number 2 (2016).

[11] Marupilla Akhil Teja, Katari Ayyappa, Sunny Katam and Panga Anusha, Analysis of exhaust manifold using computational fluid dynamics, July 28, 2016.

[12] Rajesh Bisane, Dhananjay Katpatal, Experimental investigation & CFD analysis of single cylinder four stroke CI engine exhaust system, IJRET, eISSN: 2319-1163.

[13]Vvrls Gangadhar, Mogulappa, Gyadari Ramesh CFD analysis in exhaust manifold in engines [IJESAT] International Journal of Engineering Science & Advanced Technology, Volume-7, Issue-1, 032-044, 2017

 

[14] Kanupriya Bajpai1, Akash Chandrakar, CFD analysis of exhaust manifold of SI engine and comparison of back pressure using alternative fuels. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2017

 

[15] G. Shree Bhavani Charan, analysis of exhaust manifold of multi cylinder SI Engine using ANSYS, IJRME, International Journal of Research in Mechanical Engineering, 2018

 

Related Images:



Recent Images



Synthesis of potassium salts from derivatives of natural acids
PDE based Analysis for Propagation of Disturbance by Users Mobility in Mobile Network System
Probabilistic Model for rGO-enriched nano-ceramics for electro-mechanical study
Heavy Metal Tolerance and Toxicity Studies on- Indigenous Microflora and its Application for Bioremediation
Volumetric and Spectroscopic Studies of 1-ethyl-3-methylimidazolium Ethylsulfate/Propane-1-ol Binary Mixtures at Different Temperatures
The Influence of Soap and Alcohol-based Cleanser on Human Skin
Carbon Quantum Dot and Application: A Review
Stabilization and Solidification: A solution to the excessive pollution released by The INEOS Neville Plant
Study of etnano-medicinal plant of Himachal Pradesh
Green Synthesis of Zinc Oxide Nanomaterial

Tags


Recomonded Articles:

Author(s): Binod Shrestha, Sambridhi Shah, Khagendra Chapain, Rajendra Joshi, Rajesh Pandit

DOI: 10.55878/SES2022-2-1-7         Access: Open Access Read More

Author(s): Sushant Bindra; Mehak Piplani

DOI:         Access: Open Access Read More

Author(s): Anand Pathak; Saurabh Deshmukh

DOI:         Access: Open Access Read More

Author(s): Shathya Pranav Sujithra Rajesh Kannan

DOI: 10.55878/SES2022-2-2-1         Access: Open Access Read More